bg sanpham
Four-Point Expander Four-Point Expander The FPC‐7034 Four-point Expander doubles the number of alarm initiating device circuits on the FPD‐7024 Fire Alarm Control Panel (FACP). These circuits are identical to the circuits on the FACP.
This plug‐in module is automatically recognized by the control panel's firmware when power is restored to the system.

 
FPC‐7034 Bosch Conventional Fire Alarm System 1.000 đ SoldOut
  • Four-Point Expander

    FPC‐7034
  • The FPC‐7034 Four-point Expander doubles the number of alarm initiating device circuits on the FPD‐7024 Fire Alarm Control Panel (FACP). These circuits are identical to the circuits on the FACP.
    This plug‐in module is automatically recognized by the control panel's firmware when power is restored to the system.

     

  • Manufacturer: Bosch
  • Origin: China
  • Download:
    363.27 KB
    202.49 KB
- Adds four Class B (Style B) or Class A (Style D)
initiating circuits to the FPD‐7024 FACP
- For use with normally‐open (NO) or normally‐closed (NC) alarm contacts
- Compatible with two‐wire or four‐wire smoke detectors
- Up to 20 two‐wire smoke detectors per circuit
- Easy installation due to plug‐in design and screw terminal circuit connections
- Environment: Indoor, dry
- Relative Humidity: Up to 95%, non‐condensing
- Temperature (operating): +32°F to +122°F (0°C to +50°C)
- Alarm Current (short circuit): 40 mA maximum
- Alarm Current (threshold): >25 mA
- Detector Standby Current (total): 3 mA maximum
- Loop Supervision Current: 8.0 mA to 15.0 mA
- Trouble Current Threshold: <7 mA
- Voltage (supply): 18.0 VDC to 25.5 VDC


>>> Learn more: Bosch Conventional Fire Alarm System
>>> Learn more: Bosch Addressable Fire Alarm System (EN 54)
>>> Learn more: Other Product
You did not use the site, Click here to remain logged. Timeout: 60 second