Viking NOVEC 1230 Fire Suppression System (23 products)

The Novec 1230 Fire Extinguishing System uses 3MTM NovecTM 1230 extinguishing fluid that is stored in the system’s extinguishing agent container(s) until system activation. The container assembly includes a welded or seamless steel cylinder filled with NovecTM 1230 fluid.

The Novec 1230 Fire Extinguishing System uses 3MTM NovecTM 1230 extinguishing fluid that is stored in the system’s extinguishing agent container(s) until system activation. The container assembly includes a welded or seamless steel cylinder filled with NovecTM 1230 fluid
 

Monitoring device Halocarbon agents

At nominal pressure the contact is opened. Contact makes with falling pressure or anticlockwise pointer motion
 

The nozzles NCD are used as room protection nozzles in accordancewith system approval in VSN 1230fire extinguishing systems using the extinguishing agent NovecTM   1230.
They are used to supply the extinguishing agent within the calculated flow time and distribute it evenly throughout the extinguishing area.

The shuttle  non-return  valve  is used  in fixed  high pressure C02, argon, nitrogen, IG-55 and IG-541  fire extinguishing systems  or in VSN  1230/200  fire extinguishing   systems according  the system  approval.

The selector  valve  BV DN 25/40/50  is used in accordance with the "documentation   of special  extinguishing systems"   in fixed C02, argon, nitrogen, IG-55 and IG-541 high pressure  fire extinguishing   systems  or VSN  1230/200  fire systems  respectively.
In case of fire the selector valve DN 25/40/50 is used for flooding selected extinguishing zones.
 

The manifold selector valve  BV DN65/80/100 pneumatic is used in accordance with "documentation of special extinguishing systems" in: - fixed C02- high pressure fire extinguishing systems - argon-,  nitrogen, IG-55-, IG-541 extinguishing systems with Constant Flow (CF)

The safety device malfunction pressure is used in accordance with the project-specific system schema in fixed fire extinguishing systems. The safety device malfunction pressure is intended only for releasing small amounts of leakage in pneumatic pilot lines. The safety device closes automatically on higher pressure.
 

Pneumatic actuation of extinguishing agent cylinder valves of type 887669. One extinguishing agent cylinder valve each can be openend pneumatically

The release device PAE electrical  must only be used in accordance with system  approval  in stationary  carbon dioxide, argon, nitrogen, VSN 200  and VSN  1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with  carbon dioxide   (C02) as work  medium and is used to activate:
- Cylinder  batteries
- Selector valves
- Pneumatic control elements and alarm components (makrofon)
- Pneumatic door closing  devices
- Pneumatic pressure relief dampers.

The release device EM may be used only in accordance with the "documentation of special extinguishing   systems" in fixed C02, argon, nitrogen, IG-55 and IG-541fire extinguishing systems. It is used for electrical release of lever valve.

The monitoring loss pneumatic activation device may only be used in accordance   with system approval in stationary C02-, argon-and nitrogen fire extinguishing systems. It facilitates monitoring of the permissible loss (5% - 10% supply per control cylinder). If the permissible margin of loss is exceeded the beam weight falls and actuates a reed contact limit switch.
The limit switch sends a fault message to the monitoring control panel and the fault is indicated locally via LED.

Pneumatic timer PV-3-BND, Control device pneum. SEP-2 and SEP-2-B.

The  limit  switch  pneum. operated   may only  be used  in accor* dance  with system  approval  in stationary C02,    argon  and nitrogen  fire extinguishing   systems.
 

To connect  the valve  of the extinguishing   agent  cylinder  to the nozzle  pipe,   the manifold,   or the check  valve.

To connect:
- The master  extinguishing   agent  cylinder  and the
pneum.  release  devices  of other extinguishing   agent  cylinder
- Two pneumatical   release  devices
- The pneumatical   release device and the pilot pipe of multi zone systems
 

The pilot control  manifold  DN 15 may only be used in accordance   with system  approval  in stationary  C02, argon, nitrogen,  IG-55, IG-541 and VSN 1230/200  fire extinguishing systems.  It is used as a pilot control  valve  in the pneumatic activation  of fire extinguishing   systems  or as a C02   extinguishing agent  manifold  for small  design  quantity.

Rigid connection  between  the valve  of the extinguishing   agent cylinder  and the downstream   piping.

When  using  more than one cylinder  at a conjointly  pipework  a check  valve  is to be used with each  cylinder  between  cylinder and pipework  or manifold.
This  prevents  that extinguishant   gets to not operated  valves  or escapes  unaimed  with dismounted   cylinders.